Using fast shutter should pay attention to
Introduce you to use fast shutter should pay attention to the following:
1. When used for the first time, check the power supply voltage and phase and this volume match door, rapid rolling door should guarantee the right running direction.
2. Adjust the radar or the circular appropriate detection range.
3. When there is a strong storm or when not in use for a long time, the door please reach the upper limit position, and cut off power supply.
4. Please don't stay at the bottom of the door, lest cause accident harm.
5. Power failure, should press the abrupt stop switch, in order to avoid suddenly calls, door action cuts.
6. Please don't use sharp instrument cut fabric.
7. Try with a clean cloth to wipe the post regularly below photoelectric safety switch.
8. Regular use clean cloth to wipe rapid rolling door curtain, try to keep the curtain clean brush try curtain (do not use a neutral detergent).
9. The fast door in frequent (800 times/day), when using every 30 minutes should press the stop button for 10 minutes, such as the motor damage caused by the excessive use, our company does not undertake free maintenance responsibility. Motor electric control cabinet must be grounding protection.
10. When rapid rolling door installation, debugging, is strictly prohibited under stand or walk; After normal use from safety and door life considerations should also try to avoid in the opening and closing the bottom of the door when someone or something.
11. Close door curtain before operation, should first check below to see if there is blockage curtain, if any, must be cleared.
12. It is strictly prohibited to object to the hydrodynamic components of direct collision, otherwise will be regarded as human reason, the consequences shall be borne by the consumer.
13. Click on "next" button, such as curtain no action, must according to "stop" button immediately, so as to avoid burning motor. The damage caused by the controller or the remote control itself apart, the company does not undertake free maintenance responsibility.
Rapid rolling door motor reducer should be 14. After one year free maintenance cycle, timely (recommended replacement once every three years) to replace gear lubricating oil.
The current position：
19952701625
